The Anker Prime A110A delivers up to 300W across two USB-C ports and one legacy USB-A port, allowing simultaneous charging of two laptops at 140W each. Expert Reviews found the smart display effectively tracks real-time wattage distribution per port and battery temperature. The unit supports ultra-fast 250W input recharging via dual adapters but weighs approximately 600g with a glossy finish that attracts fingerprints, making it too heavy for pocket carry. This power bank fits users who need maximum output and detailed monitoring in a backpack, while those prioritizing lightweight portability or modern-only connectivity should look elsewhere.
Full review
300W output splits between dual USB-C and legacy port
The Anker Prime A110A is engineered as a high-output charging hub, delivering up to 300 watts of total power across its three physical ports. Each of the two USB-C ports can supply up to 140W individually, allowing the unit to fast-charge two modern laptops simultaneously without forcing them into slow-charging modes. This dual-laptop capability is a primary design goal for creators and remote workers who need to keep multiple high-end machines running in locations where wall power is unavailable or unreliable.
The third port on the device is USB-A, which Expert Reviews noted delivers between 20W and 22.5W depending on whether other ports are active.
Smart display tracks individual port wattage and temperature
A prominent feature of the A110A is its large smart display, which provides granular visibility into the power bank's operation. Rather than showing a simple battery percentage, the screen cycles through detailed readouts when devices are connected. It displays total output wattage, the specific amount of power being delivered to each individual port, and incoming charging rates while the unit itself is being refilled.
Expert Reviews found that this interface allows users to monitor exactly how power is being split between devices in real-time. In one scenario with a MacBook Air and iPad Air connected, the display showed 32W going to the laptop and 11W to the tablet, adjusting intelligently as device needs changed. The screen also provides safety information, including current battery temperature, which helps users verify that the unit is not overheating during heavy loads.
250W input recharges via dual USB-C adapters
The power bank supports an exceptionally fast 250W maximum input, but achieving this speed requires a specific setup. Users must connect two separate power adapters simultaneously to the two USB-C ports on the device. When using this dual-adaptor method, Anker claims the unit can reach 50% capacity in just 13 minutes and hit 80% in 40 minutes.
If users only have one charger available, they are limited to a maximum of 140W input into a single USB-C port. This flexibility allows travelers to top off the battery quickly at airport outlets or hotel desks where multiple power strips might be available.
Bluetooth app enables firmware updates and custom modes
The A110A connects to a dedicated smartphone application over Bluetooth, extending control beyond the physical buttons. The app provides live charts showing power output fluctuations over time, which is useful for diagnosing charging behavior or verifying that devices are drawing expected wattage. It also allows users to monitor battery status and incoming power levels from their phone screen.
A critical function of the app is firmware updates, ensuring the internal power management logic stays current as new device standards emerge. The software also offers customizable charging modes. Users can switch between Smart Mode for automatic allocation, Power Saving Mode to reduce drain when idle, or a Custom mode where they manually reserve specific wattages for each port. This level of granular control is uncommon in standard portable chargers.
600g weight and glossy finish trade off for capacity
At 26,250mAh, the A110A provides enough energy to charge a smartphone four to five times or fully recharge an iPad and MacBook Air. However, this high density results in a substantial physical footprint. Expert Reviews described it as a hefty 600g brick measuring 160mm long by 63mm wide. The weight makes pocket carry impossible, requiring users to dedicate space in a backpack or tech pouch.
The exterior design features a large gloss black panel that houses the display, which expertreviews noted is highly prone to collecting fingerprints and smudges during daily handling. Digital Camera World added that despite the sleek industrial look, the glossy glass can accumulate slight scratches over time if not protected by the included faux leather case.
TSA flight approval sits just under 100Wh limit
The battery capacity of 26,250mAh equates to approximately 99.75 watt-hours, placing the A110A right at the edge of the TSA's carry-on allowance for lithium-ion batteries. Because it falls strictly under the 100Wh threshold, it is approved for airline travel without special permission.
Travelers are advised to keep the device easily accessible in their carry-on bags rather than checking it, as checked luggage strictly prohibits spare lithium batteries.
Performance stability varies across different protocols
While the A110A boasts high peak wattages, real-world protocol consistency has drawn mixed reviews. MobileReviews-Eh's testing found that power delivery fluctuated frequently, with one 100W discharge test failing at 30% before the bank locked the reviewers out of 100W mode.
This instability stands in contrast to expertreviews' experience, which recorded a steady 137.6W output when charging another high-capacity power bank and consistent performance across multiple devices. The discrepancy suggests that while peak numbers are achievable, users relying on strict PPS or PDO profiles for sensitive electronics should verify compatibility with their specific gear before depending on the A110A as a sole power source.
Strengths
- +Delivers up to 300W total output, allowing simultaneous charging of two laptops at 140W each via dual USB-C ports.
- +Supports ultra-fast 250W input recharging when using two power adapters simultaneously on the USB-C ports.
- +Includes Bluetooth connectivity for app control, firmware updates, and customizable charging modes.
- +Features a detailed smart display that shows real-time wattage distribution per port and battery temperature.
Watch-outs
- −One of the three output ports is a legacy USB-A port instead of a third USB-C port.
- −High-gloss black finish is prone to showing fingerprints and smudges easily.
- −Weighs approximately 600g (1.3 lbs), making it too heavy for pocket carry.
How it compares
The Anker Prime A110A provides vastly superior output at 300W, allowing it to charge two laptops simultaneously where the AsperX is limited to a single high-power device and the Shargeek offers less total wattage. It also features Bluetooth app control for firmware updates, a connectivity feature absent from both the Anker A1383 and the AsperX.
Rating sources
Counts as 4.91/5 in our score — this publisher's 14 scores on the site average 4.29, so its scores are adjusted down to compare fairly with other publishers.
“I've been really impressed with the 300 watt power bank.”
Our 4.9 score is the average of the 1 scored review above, each adjusted for how strictly its publisher scores; 4 more reviewed it without printing a score and are not in the average. More about methodology.
