Verdict
All guidesResearchOpen dataMethodologyAboutContact
Head-to-head · Best Laser Engravers

xTool F2 Ultra UV vs xTool P3

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

xTool P3 comes out ahead by a clear margin (4.8 vs 4.5). The gap is mostly about High-volume producers needing large format cutting without splitting batches — read the strengths below before deciding.

xTool F2 Ultra UV
Ranked #4 in Best Laser Engravers
xTool F2 Ultra UV
6 sources$7,311.58as of Oct 1

The xTool F2 Ultra UV utilizes 355nm cold-processing technology to engrave heat-sensitive materials like chocolate and paper without charring or melting, while its interchangeable lens system enables embedded 3D crystal work. Hobbylasercutters highlighted this unique inner engraving capability as a standout feature for the machine. However, the device operates exclusively within the closed xTool Studio ecosystem, which lacks compatibility with third-party tools like LightBurn, and its material preset library is incomplete, requiring manual tuning for many substrates. Hackster.io noted that this software restriction may be a dealbreaker for some users. This laser suits makers who prioritize thermal-free precision on delicate items over open-source workflow flexibility.

Strengths
  • — Cold-processing UV technology at 355nm enables photochemical ablation that engraves without burning, charring, or melting heat-sensitive materials like chocolate and paper.
  • — Capable of embedded 3D inner crystal glass engraving using a specialized interchangeable lens and precision pedestal stand included in the package.
  • — Features dual 48-megapixel internal cameras that provide accurate positioning down to approximately 0.2 mm and support auto-focus workflows.
Watch-outs
  • — The xTool Studio software ecosystem is closed, offering no compatibility with third-party tools like LightBurn which many makers prefer.
  • — The material preset library in the software is incomplete, requiring users to manually dial in settings for many specific materials not listed by default.
$7,311.58 · Check Price on AmazonFull review →
xTool P3
Higher ratedRanked #3 in Best Laser Engravers
xTool P3
4 sources1 derived$6,299as of Oct 1

The xTool P3 features a massive 915 by 458 millimeter working area that accommodates full sheets of material without splitting batches, according to hobbylasercutters. Its Automated Creation System uses four cameras and LiDAR for automatic bed leveling and autofocus, which Make or Break Shop described as the easiest industrial laser they have ever used due to its streamlined workflow. However, the machine weighs 105 kilograms, making it difficult to move without purchasing an optional mobile work stand. Initial optical path calibration can also be intimidating and time-consuming for beginners who are not familiar with mechanical alignment. This unit fits high-volume producers needing large format cutting but is likely too complex and heavy for casual hobbyists.

Strengths
  • — Massive 915 x 458 mm (36 x 18 inch) working area accommodates full sheets of material without splitting batches.
  • — Automated Creation System (ACS) integrates four cameras and LiDAR for automatic bed leveling, autofocus, and precise alignment.
  • — Interchangeable lens system includes Medium, Small, and Large options to optimize performance for engraving versus heavy cutting.
Watch-outs
  • — Heavy weight of 105 kg (230 lbs) makes the unit difficult to move without purchasing an optional mobile work stand.
  • — Initial optical path calibration can be intimidating and time-consuming, with some users reporting struggles during setup.
$6,299 · Check Price on AmazonFull review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

xTool F2 Ultra UV

The xTool F2 Ultra UV uses cold-processing UV technology to engrave heat-sensitive materials like chocolate without charring, a capability the standard diode lasers in the Glowforge Aura or Creality Falcon A1 Pro lack. Although it offers precise 0.2mm positioning via dual cameras, its closed software ecosystem restricts third-party tool compatibility unlike the open workflows preferred by many makers.

xTool P3

The xTool P3 features a massive 915 by 458 millimeter working area that accommodates full sheets of material, vastly exceeding the smaller beds of the Xtool S1 40W or Glowforge Aura. Its Automated Creation System simplifies alignment for high-volume production, though its immense 105kg weight makes it far less portable than lighter models like the Wainlux K10.

Specs side-by-side

SpecxTool F2 Ultra UVxTool P3
Laser Power5W80W CO2
Laser Type5W UV laser80W CO₂ laser cutter
Working Area7874 x 7874 in36024 x 18031 in
Max Speed15,000 mm/sec1200 mm/s
Machine Weightaround 50 pounds105 kg (230 lbs)
ConnectivityWindows and macOS—
Machine Dimensions294 mm × 429 mm × 520 mm36 × 18 (91.5 × 45.8 cm)
Engraving Area200 mm × 200 mm915 x 458 mm
Accuracy—0.0079"
← See the full ranking of best laser engravers