Head-to-head · Best Laser Engravers

Ortur Laser Engraver 4 vs xTool P2 10W

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

The short answer

xTool P2 10W comes out ahead by a clear margin (3.9 vs 4.3). The gap is mostly about users wanting robust performance — read the strengths below before deciding.

Ranked #4 in Best Laser Engravers

Ortur Laser Engraver 4

3.9

$341.99as of Jul 7

The Ortur Laser Master 3 is a high-end laser engraver/cutter featuring a 20W modular laser and 20000 mm/min speed, designed for both professionals and experienced hobbyists. Reviewers noted its sleek open-frame design and comprehensive accessory inclusion, though assembly complexity and basic air assist pump are drawbacks. It performs well across various materials including wood, acrylic, glass, and aluminum, with specific settings recommended for optimal results. This machine is best suited for users with prior experience in laser technology rather than newcomers.

Strengths

— 20W modular laser module for high-power engraving and cutting
— 20000 mm/min maximum speed for efficient operation
— Open-frame design with sleek low-profile build and concealed wiring

Watch-outs

— Requires significant assembly effort with disassembled main components
— Not suitable for beginners due to complexity of setup and alignment

$341.99 · Check Price on Amazon Full review →

Higher ratedRanked #1 in Best Laser Engravers

xTool P2 10W

4.3

$3,249as of Jul 7

The xTool P2 is a powerful 55-watt CO2 desktop laser cutter that stands out with unique features like curved engraving and automated AI batch engraving. CNET called it a potential Glowforge killer, and reviewer Chris Garrett was impressed by its capabilities after just a day of testing. The machine comes fully enclosed with built-in fume extraction and air assist, making it safer to operate. It's designed for users who need robust performance for thicker materials or faster engraving speeds. However, it requires a significant initial setup with distilled water and antifreeze, and its large footprint may not suit all workspaces.

Strengths

— 55-watt CO2 laser provides substantial cutting and engraving power
— Built-in fume extraction and air assist for safer operation
— Curved Engraving feature automatically adjusts z-height for warped materials

Watch-outs

— Requires distilled water and included antifreeze before first use
— Machine size is substantial at 39.4×25.1×10.6 inches

$3,249 · Check Price on Amazon Full review →

How they stack up

Ortur Laser Engraver 4

The Ortur Laser Engraver 4 surpasses the xTool D1 Pro in power with its 20W modular laser and high-speed operation, but it requires more complex setup and lacks the included tutorials and ease of assembly that the D1 Pro provides. It also doesn't match the xTool P2's built-in fume extraction or the Atomstack P50 Pro's air assist system.

xTool P2 10W

The xTool P2 stands out from the Glowforge Pro with its fully enclosed design and built-in fume extraction, features that the Glowforge lacks without an expensive add-on. Compared to the xTool D1 Pro, it offers more power with its 55-watt CO2 laser and includes advanced AI batch engraving, but requires more setup effort and has a larger footprint.

Specs side-by-side

Spec	Ortur Laser Engraver 4	xTool P2 10W
Laser Power	20W	55 Watt CO₂
Laser Type	CO2 laser cutter	CO2 Laser
Work Area	15.74" x 15.74" (400 x 400 mm)	26.7×14.1 (680*360mm)
Max Speed	20000 mm/min	600mm/s
Software	LightBurn (Paid), LaserGRBL (Free)	xTool Creative Space / LightBurn
Machine Size	600mm570mm130mm	39.4×25.1×10.6 (1000×639×268mm)
Weight	14.3 lb	99.2 lb

← See the full ranking of best laser engravers