Head-to-head · Best Impact Drivers

DeWalt DCF860 Impact Driver vs Milwaukee M18 FUEL Impact Driver 2953-20

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.

The short answer

Milwaukee M18 FUEL Impact Driver 2953-20 comes out ahead by a narrow margin (4.7 vs 4.6). Milwaukee M18 FUEL Impact Driver 2953-20 is best for: Professionals seeking high-speed performance with consistent torque. Read the strengths below before deciding.

Ranked #2 in Best Impact Drivers

DeWalt DCF860 Impact Driver

4.6

1 source$319as of Oct 11

The DeWalt DCF860 delivers a substantial performance leap over its predecessor, offering 2500 in-lbs maximum torque and 3800 RPM top speed. It outperforms competitors like the Flex FX1371A and Milwaukee 2953 in driving tests, completing tasks faster than the DCF845. The tool features a compact design with a 4.8-inch head length and includes LED lighting for dark work environments. While it's more powerful, the increased weight of 2.7 lbs (bare) may be a consideration for some users.

Strengths

— Impressive performance boost over DCF845 with 675 in-lbs more torque
— Top speed reaches 3800 RPM (400 RPM increase)
— Compact design with 4.8-inch head length

Watch-outs

— Weight is higher than DCF845 at 2.7 lbs (bare tool)
— No significant drawbacks mentioned but heavier weight may be a trade-off for some users

$319 · Check Price on Amazon Full review →

Higher ratedRanked #1 in Best Impact Drivers

Milwaukee M18 FUEL Impact Driver 2953-20

4.7

2 sources$113as of Oct 4

The Milwaukee M18 Fuel Impact Driver 2953-20 represents the fourth-generation upgrade with enhanced speed and impact rate, delivering 3900 RPM and 4400 IPM while maintaining the same 2000 in-lbs of torque. It features a more compact design at 4.47 inches, a tri-beam LED light ring for better visibility, and one-hand bit insertion. While performance remains strong, reviewers noted that the trigger system lacks spring assistance and torque remains unchanged from the Gen 3 model. This tool is ideal for professionals seeking reliable, high-performance impact driver capabilities in a compact form factor.

Strengths

— 4th generation upgrade delivers 300 RPM faster maximum speed at 3900 RPM
— Compact design at 4.47 inches with no change in weight at 2.2 pounds
— Tri-Beam LED light ring around collet provides better illumination, per TechGearLab

Watch-outs

— No significant torque increase from previous model (2000 in-lbs)
— lowest power setting may not be delicate enough for some projects, per TechGearLab

$113 · Check Price on Amazon Full review →

How they stack up

DeWalt DCF860 Impact Driver

The DeWalt DCF860 Impact Driver delivers 2500 in-lbs of maximum torque, more than the Ryobi 18V One+ HP Brushless PBLID04 at 2,300 in-lbs, the Milwaukee M18 FUEL Impact Driver 2953-20 at 2000 in-lbs and the Makita XDT19 Impact Driver at 1590 in-lbs. Its 3800 RPM top speed is just under the Milwaukee's 3900 RPM. At 2.7 lbs bare it is heavier than the Milwaukee at 2.2 lbs, with a 4.8-inch head against 4.47 inches.

Milwaukee M18 FUEL Impact Driver 2953-20

The Milwaukee M18 FUEL Impact Driver 2953-20 runs at 3900 RPM, ahead of the DeWalt DCF860 Impact Driver at 3800 RPM and the Makita XDT19 Impact Driver at 3600 RPM. Its 2000 in-lbs of maximum torque is below the DeWalt's 2500 in-lbs and the Ryobi 18V One+ HP Brushless PBLID04's 2,300 in-lbs. At 2.2 lbs it is lighter than the DeWalt at 2.7 lbs bare, and it costs less than the DeWalt and the Makita.

Specs side-by-side

Spec	DeWalt DCF860 Impact Driver	Milwaukee M18 FUEL Impact Driver 2953-20
No-Load Speed	3800 RPM	3900 RPM
Impact Rate	4500 IPM	4400 IPM
Max Torque	2500 in-lbs	2000 in-lbs
Weight	2.7 lbs (bare tool)	2.2 lbs
Chuck Size	1/4 in. hex	1/4" Hex
Motor Type	Brushless	POWERSTATE Brushless Motor
Chuck Type	1/4 In. Quick-connect Hex Chuck	1/4" Hex
Speeds	3	3900 RPM
Voltage	20 volts	18 volts
Battery	—	M18 REDLITHIUM Battery Packs
Torque Control	—	4-mode drive control

← See the full ranking of best impact drivers