Head-to-head · Best Jobsite Table Saws

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw vs SKIL TS6307-00 15 Amp 10-Inch Jobsite Table Saw

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.

The short answer

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw comes out ahead by a narrow margin (4.6 vs 4.5). Bosch GTS15-10 10-Inch Portable Jobsite Table Saw is best for: Framers needing deep cut capability without a bulky stand. Read the strengths below before deciding.

Higher ratedRanked #2 in Best Jobsite Table Saws

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw

4.6

1 source$649as of Oct 28

The Bosch GTS15-10 features a rack-and-pinion fence system that Pro Tool Reviews found allows for fast, accurate alignment without binding or squaring issues. Its 15-amp motor delivers 3800 RPM with soft-start circuitry to protect the unit during startup, while Electropro.blog noted consistent power under load prevents vibration and chattering. The saw offers a depth of cut reaching 3-9/16 inches at 90 degrees, enabling single-pass cuts through standard 4x lumber for framers and deck builders. However, the dust collection port uses a non-standard diameter that often requires an adapter to fit shop vacuums. This model fits professionals needing reliable performance and precise joinery capabilities but may frustrate users prioritizing seamless vacuum integration.

Strengths

— Rack-and-pinion fence system provides fast, accurate alignment without binding or squaring issues.
— 15-amp motor delivers 3800 RPM with soft-start circuitry to protect the motor during startup.
— Increased depth of cut reaches 3-9/16 inches at 90 degrees, allowing single-pass cuts through 4x lumber.

Watch-outs

— Dust collection port uses a non-standard diameter that often requires an adapter to fit shop vacuums.

$649 · Check Price on Amazon Full review →

Ranked #4 in Best Jobsite Table Saws

SKIL TS6307-00 15 Amp 10-Inch Jobsite Table Saw

4.5

1 sourceall derived$299as of Nov 1

The SKIL TS6307-00 features an integrated folding stand that allows one-person setup and transport, while its rack and pinion fence system ensures smooth adjustments. Pro Tool Reviews found the locking mechanism provides a rigid feel superior to typical DIY models, though it recorded approximately 1/32-inch of variance toward the far end of the table surface. Bestusatools notes the 15-amp motor handles dense hardwoods without bogging down, but the stock 24-tooth blade is optimized only for rough cuts and should be replaced for smoother finishes. Dado stack compatibility is limited to blades 5/8-inch or less in width, requiring users to verify insert specifications before purchasing additional equipment. This saw fits contractors who prioritize portability and speed on active jobsites but may disappoint those needing fine cabinetry precision without extensive calibration.

Strengths

— Integrated folding stand allows one-person setup and easy transport to jobsites
— Rack and pinion fence system ensures smooth, precise adjustments and keeps the fence parallel to the blade
— 15-amp motor provides sufficient torque to cut through dense hardwoods like oak and maple without bogging down

Watch-outs

— Stock 24-tooth blade is optimized only for rough cuts and should be replaced for smoother finishes
— Dado stack compatibility is limited to blades 5/8-inch or less in width

$299 · Check Price on Amazon Full review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw

The Bosch GTS15-10 offers a deeper depth of cut (3-9/16 inches) than the Craftsman 10-Inch Table Saw, making it better suited for single-pass cuts through thick lumber.

SKIL TS6307-00 15 Amp 10-Inch Jobsite Table Saw

The SKIL TS6307-00 is the lightest option at 51 lbs, significantly easier to move than the Ridgid's 98 lb unit or the Bosch GTS15-10's 91 lb frame.

Specs side-by-side

Spec	Bosch GTS15-10 10-Inch Portable Jobsite Table Saw	SKIL TS6307-00 15 Amp 10-Inch Jobsite Table Saw
No Load Speed	3800 RPMs	4600 RPM
Rip Capacity	32-1/8 in.	25.5 inches
Weight	91 lb	51 lb
Blade Diameter	—	10-inch

← See the full ranking of best jobsite table saws