Head-to-head · Best Jobsite Table Saws

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw vs DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.

The short answer

DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand comes out ahead by a narrow margin (4.7 vs 4.6). DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand is best for: contractors and serious DIYers who rip sheet goods on site and want an accurate fence. Read the strengths below before deciding.

Ranked #2 in Best Jobsite Table Saws

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw

4.6

1 source$649as of Oct 28

The Bosch GTS15-10 features a rack-and-pinion fence system that Pro Tool Reviews found allows for fast, accurate alignment without binding or squaring issues. Its 15-amp motor delivers 3800 RPM with soft-start circuitry to protect the unit during startup, while Electropro.blog noted consistent power under load prevents vibration and chattering. The saw offers a depth of cut reaching 3-9/16 inches at 90 degrees, enabling single-pass cuts through standard 4x lumber for framers and deck builders. However, the dust collection port uses a non-standard diameter that often requires an adapter to fit shop vacuums. This model fits professionals needing reliable performance and precise joinery capabilities but may frustrate users prioritizing seamless vacuum integration.

Strengths

— Rack-and-pinion fence system provides fast, accurate alignment without binding or squaring issues.
— 15-amp motor delivers 3800 RPM with soft-start circuitry to protect the motor during startup.
— Increased depth of cut reaches 3-9/16 inches at 90 degrees, allowing single-pass cuts through 4x lumber.

Watch-outs

— Dust collection port uses a non-standard diameter that often requires an adapter to fit shop vacuums.

$649 · Check Price on Amazon Full review →

Higher ratedRanked #1 in Best Jobsite Table Saws

DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand

4.7

2 sources$599as of Nov 1

The DeWalt DWE7491RS is a 15-amp, 10-inch jobsite table saw with a rack-and-pinion fence, a 32-1/2-inch rip capacity and a folding rolling stand. Bob Vila rated it 9.5/10 after it made smooth, square and accurate cuts right out of the box, and Tool Box Buzz gave it 5/5, praising a fence that is easy to adjust and stays parallel to the blade. The trade-offs are weight and depth: the saw weighs 90 pounds, the stand took Bob Vila about an hour to assemble, and Pro Tool Reviews notes the 3-1/8-inch cut depth at 90 degrees is just shy of ripping 4x material. It suits contractors and serious DIYers who cut sheet goods on site and want an accurate fence without a shop saw.

Strengths

— Cut smooth, square and accurate right out of the box in Bob Vila's testing
— Rack-and-pinion fence adjusts easily and stays parallel to the blade
— 32-1/2-inch rip capacity handles large sheet goods on the jobsite

Watch-outs

— Heavy at 90 pounds, and the stand takes about an hour to assemble
— 3-1/8-inch cut depth at 90 degrees is just shy of ripping 4x material
— Blade-guard dust port is awkward to use, and the stock miter gauge is basic

$599 · Check Price on Amazon Full review →

How they stack up

Bosch GTS15-10 10-Inch Portable Jobsite Table Saw

The Bosch GTS15-10 offers a deeper depth of cut (3-9/16 inches) than the Craftsman 10-Inch Table Saw, making it better suited for single-pass cuts through thick lumber.

DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand

The DeWalt DWE7491RS offers a 32-1/2-inch rip capacity on a four-leg rolling stand. Its 3-1/8-inch depth of cut at 90 degrees is shallower than the Bosch GTS15-10, which cuts through 4x lumber in one pass, so framers ripping thick stock may prefer the Bosch. It costs about twice as much as the SKIL TS6307-00 and a little less than the Bosch's listed $649. Like the Ridgid 10-Inch Pro Jobsite Table Saw with Stand, it comes on a rolling stand.

Specs side-by-side

Spec	Bosch GTS15-10 10-Inch Portable Jobsite Table Saw	DeWalt DWE7491RS 10-Inch Jobsite Table Saw with Rolling Stand
No Load Speed	3800 RPMs	—
Rip Capacity	32-1/8 in.	32-1/2 in. right, 24 in. left
Weight	91 lb	90 lb
Blade Size	—	10 in.
Motor	—	15 amp, 4,800 RPM
Depth of Cut	—	3-1/8 in. at 90°, 2-1/4 in. at 45°
Fence	—	Rack-and-pinion telescoping
Dust Port	—	2-1/2 in.
Dado Capacity	—	3/4 in.
Stand	—	Folding rolling stand
Included Blade	—	24-tooth
Warranty	—	3 years

← See the full ranking of best jobsite table saws